Why is my TV not reading my USB

Solution 1 - Check the condition of USB ports on TV One possible cause for the USB device not working on TV is the burnt out ports. Check the status of the USB ports on your TV and ask for a repair service from the manufacturer if the ports are in bad condition. Also, make sure that the ports are free from dust Some TV's have issues with capacities >XGB (varies from TV to TV). I've seen problems with USB3.0 drives that require a little more power than the typical USB2.0 (on most TVs) provide. The format.. Insert your USB device into the USB connector at the side of the TV. Switch on your TV. The BROWSE USB icon will be shown on the home menu if the TV recognizes the USB flash device. NOTE: If the TV does not recognize the USB flash device, try re-inserting the USB flash device and repeat the procedure again

USB drive stops working on TV [SIMPLEST FIXES

My Sony TV can't read USB!That's not that hard, since it is only three letters. Are you using a USB cable or USB memory stick?I'd expect way worse errors if. You may not be able to see file/folders for a number of reasons. The 2 most common causes are that the USB drive must for FAT32 Formatted. And that the files are in a recognisable format for the TV to 'read' (ie MP4). What type of files are they (as in JPG, AVI, MP4, MPG, MKV etc) First, to turn off WDTV completely you must unplug it from the wall socket. The drive also has a power supply, so unplug its power supply at wall after turning off the WDTV. Check to see that the drive's USB cable is still into the WDTV. You can even unplug and re-plug it into the WDTV now for good measure to be sure it was well connecte First make sure that the USB port on your LG television is used for displaying video, then check if the pen drive has been formatted to a particular file system such as FAT, FAT32 or NTFS. Also.. Yes, of course the TV is able to access your USB devices for playback and recording (if registered to do so). But since the Operating System kernel between Android and Windows is from an architecture perspective so different, there often can be unexpected behaviour on both sides

Unplug your USB drive, shut down the system, and then remove the power cord from the power supply as the modern systems don't go off completely and the motherboard still gets power. Then connect the power supply, boot the system, and plug in your USB drive. Check if it's recognized and you are able to access the drive via File Explorer If your TV does not support the NTFS file format, but prefers the Fat32 format instead, then you will need to download a third party utility to convert your NTFS drive to Fat32 — since Windows 7 cannot do this natively. Note - As opposed to Windows 7, the latest version of Windows 10 can convert drives to Fat32 natively If your USB drive is not showing up, it could be a driver or hardware issue, or the drive is dead. Try Plugging Into a Different Computer Or USB Port Unplug the USB stick from the current port and computer, and try plugging into a different computer and/or USB port If after following the instructions provided with your USB hub, the USB drive is still not recognized, we suggest trying the following methods: Method 1: Connect the USB hub to the USB port on the powered up Roku device. Turn on the power to the USB hub. Connect the USB drive to the USB hub. Method 2 It has owrked perfectly with my WD Live Tv for a year!! I have done factory reset and still it does not work. I have tried another WD USB disk and same problem. It will not read the files or hang. But with small USBs 4Gb it works ok. PLEASE HELP!!! Redleeche. October 15, 2015, 3:19am #4. I got WDTVLIVE (with up to date official firmware) since.

Why my tv does not recognize USB drive? Tom's Guide Foru

  1. I Have a panasonic TX-P50X50B TV and the usb port will not recognise any USB flashdrive, or external hard drive, but it does recognise my sd card in the sd card slot and I van view photos on the sd card but not on the USB. I am doing something wrong? Submitted: 8 years ago
  2. 1. Right click on Windows Start > Device Manager > Click the topmost entry i.e. your device > Click Action in Menu > Click Scan for hardware changes Now you should be able to see your USB drive 2, Right click on Windows Start > Device Manager > Expand Disk Drive > Locate the Drive > Right click on this > Uninstall > Reboot your compute
  3. 2) Expand Universal Serial Bus controllers. Right-click a device and select Uninstall. Repeat for each device. 3) Restart your PC and your USB controllers will be automatically re-installed. Your computer will then recognize the USB device if the issue occurred because the currently loaded USB driver has become unstable or corrupted
  4. This vid will show you how to fix or repair a corrupted usb flash drive which is got detected but not shown in my computer just follow the steps.It also show..
  5. I have the same problem. My USB Ports are not showing up on my computer nor reading flash drives. I've done all that you stated above several times and nothing has been fixed. Flash drive not working when installed in USB port

Hi all. I have a Roku 32 in my motorhome. I tried to plug in a 1 terabyte storage device but the TV does not acknowledge it. The USB input plays video off a thumbdrive just fine but does not seem to 'see' when the bigger device is plugged in, even after a long wait Reasons why your computer isn't recognizing your USB device include: There is a problem with the USB driver. The USB drive isn't properly formatted. The USB drive is dead. There's a problem with the USB port. If it turns out the problem lies with the port, then you'll want to read our guide on why USB ports stop working (USB hubs are not supported.) These kinds of devices must be connected directly to the USB port. The TV may not be able to recognize a USB device or read the files on the device if it is connected with a USB extension cable. Do not disconnect USB devices while they are transferring files

If your USB drive files are hidden, you can only see the USB drive. Here, you have 2 options to unhide files when USB drive not showing files and folders. Step 1: Connect your USB drive to PC. Step 2: Right-click Start button and then choose Control Panel. Step 3: Click Appearance and Personalization Please dispose of e-waste and plastic waste responsibly. For more information or e-waste pick up, please call 1800 40 SAMSUNG (7267864) or 1800 5 SAMSUNG (7267864) or click here for more details. Registered Office Address: 6th Floor, DLF Centre, Sansad Marg, New Delhi-11000 I had the same problem and I solved it by changing my USB stick with a smaller size one. The first USB stick had 2GB size, probably to big for the TV. I had the same issue with other older devices. Using a USB stick with a size lower than 512MB I made the firmware update without problems Switch the TV set on and wait for one minute for it to be fully operational. Press the Source button on the remote control and select the correct [USB] port. If the TV does not recognize the device, try re-inserting it with the TV being switched on and repeat this step. Select the folder/file that is going to be browsed and press OK Took me a while to figure out that was my problem. If it's a USB3 drive, try using a USB 2 extension cable to connect it to the TV (it's important that the extra pins for USB 3 are NOT connected in the cable). The TCL Roku TV's sometimes have issues with USB 3 drives because the connector on the TV is USB 3, but the TV doesn't actually support.

Why is my Philips TV not able to recognize a USB flash

I connected this external hard drive to my LG Smart TV LB7500 (Australian model) via the USB port. Initially, this worked fine, however, when I later went to add more movies onto it (and proceeded to connect it), the TV wouldn't recognize it. I have read the user guide and feel I have stuck to the conditions for this to work, bar one thing Disconnect and reconnect the HDMI cable. Disconnect the HDMI cable from the back of the TV and the external device. Then reconnect it firmly to the external device first, then connect it to your TV. If it still doesn't work, try the cable in a different port. Don't forget to select the new source Format a USB Drive with Mac OS. Connect the USB Device to your Mac computer. Open Disk Utility. Click to select the USB Device in the left panel. Switch to the Erase tab. In the Volume Format selection box, click MS-DOS File System. Click the Erase button.; At the confirmation dialog, click the Erase button. Your USB drive should now be formatted and ready to work on your TV I have external USB drive format in Fat32. Fat32 disk format support upto only 4 GB file. HD movies are more than 4 GB, which can't transfer to external USB drive format in Fat32 connected to Android TV. while NTFS and exFAt can support file bigger than 4 GB. Android TV do not support NTFS and ExFat format Solution 1: Try a Different USB Port to Fix Disk Not Reading in PC. Sometimes, the real problem is with the USB port to which the external hard drive is connected. If the pen drive is not responding then it is recommended to plug hard drive into a different USB port. Remove the external hard disk connecting the cable from your PC

Solved: Samsung Smart TV USB Flash Drive Not Workin

Via your TV's USB port, you can hook up a flash drive, pen drive, or an external hard drive and watch movies, play songs, or even read books you have on those storage devices. You can also view photos from your gallery/album or any digital media device — as long as your TV supports the multimedia formats My TV is mounted in an awkward position so it was difficult to access the back of the tv. You have to connect the cable to the firestick then the other end to your USB port. This was difficult for my setup. Once I plugged both sides in and pushed my TV back into position it was all set If your USB drive comes with an external power adapter, then connect it to a power outlet. If your USB drive does NOT come with an external power adapter, you will need to use a powered USB hub. Connecting your USB drive to a powered USB hub. Some powered USB hubs require a specific order of operation to work correctly

Answers - in order of the above: 1 - check the format, make it fat32 or ntfs (if you can without losing anything on it) 2 - run a cmd prompt chkdsk /x F: (where F: is the flash drive letter on yiour laptop/computer) 3 - try anotehr flahs drive or two in that port. Results My Hisense TV Keeps Killing USB Drives And How They Fixed It. I, like many of our readers, use portable SSDs to move around movies and photos for family. Having a handful of movies and pictures on.

Solved: Samsung tv stopped reading usb drives - Samsung

Purchased a Auvio soundbar for my Samsung 50' Smart TV. Sound is good but when I watch movies via Amazon Prime video the sound goes through the TV not the soundbar. The TV, cable and DVD player all wo read mor Connect the USB device. Wait until the message USB device is connected displays on the screen. Select from the following depending on the type of file you want to access in your USB device. Open with Album Open withMusic Open with Video Do one of the following, depending on your TV model LG TV doesn't recognize ExFat formatted USB memory stick! The issue I am facing might be known issue but really big issue for me. I own LG LCD TV and on that mostly I watch dowloaded movies via 320 GB WD External HDD and I also own Mac Pro which I bought very recently and now this is the only PC I got. My External HDD had NTFS formated but Mac. 3. Incompatible USB and digital camera devices. Many users play MKV videos via USB or digital camera devices. If none of the above is true, it might be an issue of USB or digital camera devices, which are not compatible with your Samsung TV. 4. MKV file is corrupted When the USB ports seem to still not work at all, then you should realize that maybe the drivers in your system are broken or outdated. A device driver (in this case a USB driver) or a hardware driver is actually a group of files or computer programs that enable Windows and other applications and hardware devices to interact with each other

If your Fire TV Stick isn't powered on, the streaming device can't be recognized by the TV it's connected to. Make sure the device is plugged into a functional electric socket, not your TV's USB port From services.txt, VMUSBArbService is stopped, which is the reason why you cannot see any devices in Removable Devices. This service depends on VMware Workstation Server. In your system, VMware Workstation Server does not start either. VMware Workstation Server uses port 443 by default (you can check this in Edit > Preferences > Shared VMs) Intervention #3: Make sure that your Android is set to connect as a 'Media Device' (MTP) Go to settings / storage. Next, go to more options (typically upper left dotted area, depending on your device) and click 'USB Computer connection'. Next click on the 'Media Device' (MTP) checkbox. If already checked, try unchecking it, exiting.

USB devices are supposed to install their own drivers when you plug them into a PC, but occasionally that doesn't work. Go to the device manufacturer's website and see if there is a Windows driver. Click on the Power Management tab and uncheck the Allow the computer to turn off this device to save power box. If you have more than one USB Root Hub listed, you need to repeat these steps for each one. Click OK and then restart your computer. Try to reconnect the USB device and see if it is recognized Now, go to check whether your USB drive is recognized on PC. Method 6: Update the Device Driver. Right click on the Start button in the lower left corner of the screen. Choose Device Manager. Expand Disk drives to find your USB flash drive. Choose Update driver from the right-click menu of your USB device I just made some mp4 files with my phone. Put them on Stora and browsed to the folder with TWO TVs. A Samsung and an Aquos. The Aquos said, Data not available. The Samsung doesn't show any files. I've read that others seem to be able to use MP4 files with TVs (or I THOUGHT they were talking about.. I read this guide to find a solution: Apple TV (2nd and 3rd generation): Restoring your Apple TV - Apple Support The problem is that AppleTV does not appear in iTunes, it simply will not connect. I have double checked everything (USB-cable, power supply, updated iTunes, restarted everything, etc), but it simply will not connect

My external hard drive is a Toshiba 750 GB already loaded with movies, music, photos. The DVD Player is Lasonic with a USB port, and a Sony TV. Why is the HDD not responding to a DVD player? Is there any other DVD player that can read my external hard drive? If there is, tell me the type and I buy it. Thanks What I don't understand is that all my edited files since I use photoshop elements ( i.e. since 2005) are being read by my Panasonic tv. Only those edited since 25th of august are not read. So a change in the TV software (if any) does not influence the older files

Please refer to the following instructions: 1. Make sure both large ends of the USB Y-cable are connected to your computer rear USB ports for sufficient power supply. Avoid using USB hubs, extension cables or other USB devices, as they often do not supply sufficient power. If the above method does not work, please try another USB Y-cable to examine if the cable is the cause Alternatively, go to 'Search'. And type RUN. Alternatively, press the 'Windows+R' keys to open 'Run' tool. Then type diskpart and press OK . Type LIST DISK or LIS DIS into the console. It will show all the connected drives including your USB. The newly connected USB drive should be the last on that list Double-click the Universal Serial Bus Controllers icon. Verify that no USB Composite Devices have exclamation marks (!). If any USB Composite Device has an exclamation mark, right-click the port and select Uninstall. Click the Scan for Hardware Changes icon at the top of the Device Manager window. Windows should automatically detect your hardware It sounds like you would like to have a laptop's display content sent to the display of a TV, using USB. * It cannot be done using just a USB cable alone * It can be done with a USB-HDMI converter box. The USB version is usually USB 3.0 for greate.. Launch Recoverit USB Flash Drive Recovery program, select the USB drive which detected on the software to get started. Step 2. The USB recovery software will start scanning the device, it will take a while to search the lost data. Step 3. In the end, you can check all recovered data and files

Re: Roku not working on my samsung smart tv. Jump to solution. Make sure you're using the supplied power adapter and not the TV's USB port for power. If you're already doing that, try a factory reset. Find the reset button (which may be behind a pinhole that will require a paperclip to depress) and press and hold it for at least 30 seconds. If you have already checked your USB port and all the ports are not recognizing the WD my passport Ultra, you can try changing the USB cable. In some cases, the USB cable becomes faulty and the computer becomes hesitant in recognizing the WD my passport Ultra drive. So, you can get a new USB cable to attach your hard drive with the computer Method 2: Restart the computer. If scanning for new hardware did not fix the problem, try restarting the computer. After the computer has restarted, check the USB device to see whether it is working. If restarting the computer fixed the problem, you are finished. If this method did not fix the problem, go to Method 3 On your Mac, hold down the Option key, click the Apple menu, and choose System Information or System Report. From the list on the left, select USB. If you see your iPhone, iPad, or iPod under USB Device Tree, get the latest macOS or install the latest updates. If you don't see your device or still need help, contact Apple Support

Hi Patrick, I can scan over the wireless network, but I just cannot scan to a USB drive. I wanted to scan directly to my USB drive from the printer because the wireless network that I was using had some restrictions that was not allowing me to directly access the printer It was not solved my case. I have Umidig Z Pro, runing Android 7.1.1. I already have checked OTG, use app to checked it OK, but when I connect USB or Micro SD Card via USB adapter, It has nothing, no power display on USB, but if connect it to Xiaomi it worked 100% You reconnect the same USB device or a different USB device to the same USB port on the hub. In this scenario, the computer does not detect the USB device. Note This issue affects USB 2.0 hubs and USB 2.0 components in USB 3.0 hubs. Cause. This issue occurs because the USB port is disabled after you safely remove the device from the port. When the screen came on, it recognized my usb but the file was nowhere to be found. On the computer it shows up though. So I followed an online suggestion to reformat my usb so my dvd player can locate the video file. However, I made matters worse..now my dvd player does not support my usb at all. Also, the red Sandisk icon on my computer is gone

Problems using your external USB TV Hard Disk Drive (HDD

I just got my new XPS system and my flat screen 17 digital monitor's USB ports do not respond when I plug in a USB device (i.e., IPod, Memory stick, etc.). However, If I plug directly to computer the device is read and accessible. What could I be doing wrong? Everything seems to be plugged in correctly Starting with a powered off quest. turn on and launch the occulus app on the pc. once launched, turn on your quest without the link cable in it. create your gaurdian and get to the home screen in the quest. plug the link cable in the quest. deny the first prompt that says allow the pc to access files on the tis device It seems to read the folders that are on my USB already, just not any of the individual files on them. By the way, the stick is formatted to ExFAT (tried it with FAT-32 earlier, same problem). Fix PS4 Won't Play MP4 problem. When watching MP4 files stored on USB drive on PS4, you may come across the PS4 MP4 playback issues listed below. 1 Step 1-4. Switch off your TV. Insert your USB device into the USB connector at the side of the TV. Switch on your TV. The BROWSE USB icon will be shown on the home menu if the TV recognizes the USB flash device. NOTE: If the TV does not recognize the USB flash device, try re-inserting the USB flash device and repeat the procedure again


This is why your Amazon Fire TV USB port is not working

My GF's LG TV does that. 3) I don't know, but it's likely the recording is not affected. My Sony Smart TV handles separately what it records and what it display on screen. Hence I can record a TV channel and watch a DVD (or HDMI) source at the same time; I presume your LG TV does the same. My advice is to try a test recording, and see the results 2,748. Re: Watching .avi on TV via usb drive. Some work, some don't. Any idea why? Download a copy of the Super video converter - use those 3 words to google it. If you study the options you'll find there's a setting which allows detailed analysis of a file if you double click it Jan 30, 2011. #4. Issues with USB drives can be very strange indeed. LookinAround may be able to recall the uncanny events associated with my Kingston 8GB pen drive. It would be interesting to see. Camara will not connect to PC via USB cable. 11-09-2016 06:14 PM. I've just bought a Canon EOS 1300D, and after taking a few snaps I'm eager to see how they've turned out. I've downloaded and installed the relevant software for my Windows 10 (64 bit) computer, and then connected the camera to my PC via the supplied USB cable

However, if any of your video files are over 4 GB, you will need to use either exFAT or NTFS. Determining which of those two options will depend on the device it will be viewed on. Both Windows and Mac can read from NTFS and exFAT. However, Smart TVs will often support one or the other Plug the device's USB cable into a functional charging adapter, not your TV's USB port. The Fire TV Stick needs at least 1 Ampere (1A) of power to stay on and function correctly. If plugged into a USB port with a lower power rating, the Fire TV Stick may get stuck on a black screen Device Manager opens. In Device Manager, click your computer so that it is highlighted. Click Action, and then click Scan for hardware changes. Check the USB device to see whether it is working. 2- To disable and re-enable the USB controllers, follow these steps: Click Start, and then click Run Q: My Samsung 55 Smart TV will not play two MP4 files I have on a WD HDD (Plugged into the USB Port). Both files display The selected file is not currently supported. Anyone have any idea? Q: Plugged in my 16GB USB 3.0 sticks to the Samsung Smart TV play

Re: GoPro 7 Black videos won't play on my Smart TV using USB 3 connection. At this time, the only way to display GoPro media to an external display is to an HDTV with the use of a microHDMI cable. You can playback you GoPro media on your smart TV through an SD card adapter, or a USB card reader that is compatible with the TV The Amazon Fire TV Stick 4K doesn't officially support connecting anything to it except Amazon's Fire TV Ethernet Adapter, but, using an inexpensive OTG cable it's possible to use USB peripherals, such as keyboards and wired gamepads, as well as external USB drives. The support for USB drives, in particular, isn't as thorough as the Fire TV Cube, which does officially support external.

Repair & Fix USB Flash Drive Not Recognized or Detected

Free shipping on millions of items. Get the best of Shopping and Entertainment with Prime. Enjoy low prices and great deals on the largest selection of everyday essentials and other products, including fashion, home, beauty, electronics, Alexa Devices, sporting goods, toys, automotive, pets, baby, books, video games, musical instruments, office supplies, and more USB Flash Drive / Memory card not detected on Mac USB port When I plug the USB flash drive or memory card into my MAC it does not mount to the desktop First we need to check your Finder preferences and ensure external disks are set to mount to your desktop Plugging in a USB stick with the bait ( Midget_Porn_2013.avi) into his TV, DoctorBeet soon saw data on his faux porn headed to LG's servers in unencrypted plain text. DoctorBeet (and his shocked.

My Sony TV Can't Read USB! - YouTub

  1. Unplug Adapter from your PC and Restart your PC. Now connect your USB device to the USB ports. After the USB device connected to your PC, then plug in the adapter to PC. If the above method is not working. Open RUN (Windows Logo + R) and type dev mgmt.msc and click OK. Now expand Universal Serial Bus controllers
  2. Kraken Z USB Compatibility Issue. There is a known USB compatibility issue that Kraken Z63 and Z73 customers are experiencing with select AMD Ryzen-based motherboards. The Product & Engineering teams have isolated the root cause to be an incompatibility between these AMD-based motherboards and the series damping resistors used in the NZXT.
  3. My work PC (which is Windows 7) also does not recognize it. But it works well on my home PC (win 7) and works no problem when I plug it into the USB port of my multimedia player

Solved: USB connected to TV but cannot see its folders and

Wdtv media player suddenly not reading my hard drive - WD

Case 2: PS4 USB Storage Device Not Connected. If your USB drive is plugged into PS4 but it's shown as not connected or PS4 keeps saying usb storage device not connected, you should consider the compatibility between them. It is possible that some old USB storage devices are not compatible with PS4 Click the Windows Start Icon > Right Click on Computer or My Computer and select Manage, and on the right hand pane select Device Manager. If you see a Yellow Exclamation mark visible on USB Mass Storage Device then this indicates that Windows was unable to locate the drivers for the device or has installed the incorrect drivers for. Plug a flash drive into the USB port on the back of your Fire TV. For this article, I'm using a USB 3.0 64 GB flash drive. Then, depending on the type of drive you have, you may need to let the.

LG Television doesnt recognize usb video files — Digital Sp

  1. Plug your Ethernet cable into the USB Ethernet adapter. With the Fire TV powered up go to Settings -> Network and it should now say Wired Connection on the right: USB Ethernet adapter + hub. Update! Add a USB Hub for keyboard, mouse etc. A new adapter from the same company (UGREEN) is a combined Ethernet adapter AND USB hub for £9.99
  2. Hallo i have just purchased my Janome 350e and again I am trying to transfer designs from my pc to my machine. I have followed your instructions by turning off the machine and putting my usb memory stick into the machine but when i turn it on and click on the memory stick button it just says please insert the usb memory stick or connect the cd-rom drive
  3. The first thing to check if your thumb drive is not showing up on a Mac is if the problem is with the particular USB port that you are using. At the risk of stating the obvious, your first move should be to try the device in an alternate USB port available on your machine
  4. When you burn a DVD, you're given the option to choose the burn speed (2X, 4X, 8X etc). The slower the burn, the more reliable the disc will be. In fact, some DVD players won't even play discs burned at speeds greater than 4X. If you suspect that this might be the cause, re-burn the DVD on a lower speed and see if that resolves the playback.
  5. Make sure your TV is connected to the internet through a wired connection or use a USB drive to download and install the updates. If your Sony TV runs the Android OS: On the remote control, press.

Solved: USB Stick/Drive Problem - Son

  1. Hi, after struggling to get any of my external 2.5″ HDDs working with my iPhone 11 pro (all work no problem on my USB-C Ipad Pro), I tried a powered USB hub. Unfortunately for some reason when the hub was plugged into the mains, the phone couldn't see the drive (tested using the iPad and also the same problem so looks like a wiring.
  2. The SMC is responsible for a few different aspects of your MacBook, but most importantly, it's in charge of how the power in your MacBook is distributing, including to the USB-C ports. So, if one or more of your ports aren't working, resetting the SMC will hopefully rectify the problem. Click the Apple menu in the top left corner of your screen
  3. In computer, it is straightforward to watch a movie with subtitles, but it was almost not the same in TV. The first time I tried watching the movies with subtitles on my LED TV, I failed miserably. Ensure this for watching movies with subtitles via USB on TV. So here is what I learnt with my ordeal with subtitles and TV: Your TV should be.
  4. There's even more to know about the new tech: USB4 will be available on USB-C ports. USB4 increases speeds and charging power to match Thunderbolt 3, up to 100W. USB4 will require cables.

[Solved] Why My Computer Is Not Recognizing the USB Driv